Beware: 24V power supply!
The product you are looking at requires 24V power supply - are you sure, this is what you need? If so, please proceed, all good. If not, please select the corresponding 12V item ;-)
Background info: We frequently have orders, where only upon installation customers notice, that they did not order what they needed. By then, usually the box has been opened, thrown away or damaged, cables have been cut and a few parts arre already permanently installed. Exchanges for such cases are not trivial and result in a substantial amount of work on our side and definitely costs on the customers' side. To prevent this, please double check what you need. Thank you!
Autoterm Flow 14D 24V (Teplostar 14-TC-Mini)
Description
Autoterm Flow 14D liquid heater, also known as a water heater, operates independently from the engine. This medium-sized heater, with a 14 kW heat output, works in unison with the car salon fan to pre-heat large vehicle engines and compartments, thus eliminating cold start and supplying comfortable warm air to the passenger compartment in the cold season. Newer car models may need a third party EPCU block to heat the passenger compartment.
The Flow is powered by diesel fuel and is available in 12V and 24V DC versions. This article is the 24V Version.
In extremely cold environments, the flow pre-heater also works as an auxiliary heater by helping the engine to reach its optimal working temperature where necessary when driving.
Autoterm Flow 14D comes with full installation kit and is often used as a heater for small radiator systems or boilers with a maximum capacity of 70 litres.
We recommend this product to those who wish to additionally heat truck engines, motorhomes or yachts with liquid heating systems.
Heating medium : Coolant, antifreeze coolant
Optimal liquid/coolant volume : 25 - 30 L
Heating power : 14 kW 14.5 kW
Power consumption : 110 W 130 W
Max. work altitude (MASL) : 1000 m
Fuel : Diesel
Fuel consumption : 1.9 l/h 1.9 l/h
Control mode : Manual, standard remote control
Compatible control panels : PU-11, PU-27
Weight of the heater : 5.7 kg
Weight of the set : 16 kg
Heater dimensions : 340x160x206 mm
package contents:
Fuel pump Thomas Magnete & clamp with rubber gasket
Power supply cable 12/24V and electric cable wiring
1m exhaust pipe
digital control panel PU27
Fuel tank
2m coolant hose & cover for coolant hose
Electrical liquid pump and wiring
6,ylon fuel line
The Flow is powered by diesel fuel and is available in 12V and 24V DC versions. This article is the 24V Version.
In extremely cold environments, the flow pre-heater also works as an auxiliary heater by helping the engine to reach its optimal working temperature where necessary when driving.
Autoterm Flow 14D comes with full installation kit and is often used as a heater for small radiator systems or boilers with a maximum capacity of 70 litres.
We recommend this product to those who wish to additionally heat truck engines, motorhomes or yachts with liquid heating systems.
Heating medium : Coolant, antifreeze coolant
Optimal liquid/coolant volume : 25 - 30 L
Heating power : 14 kW 14.5 kW
Power consumption : 110 W 130 W
Max. work altitude (MASL) : 1000 m
Fuel : Diesel
Fuel consumption : 1.9 l/h 1.9 l/h
Control mode : Manual, standard remote control
Compatible control panels : PU-11, PU-27
Weight of the heater : 5.7 kg
Weight of the set : 16 kg
Heater dimensions : 340x160x206 mm
package contents:
Fuel pump Thomas Magnete & clamp with rubber gasket
Power supply cable 12/24V and electric cable wiring
1m exhaust pipe
digital control panel PU27
Fuel tank
2m coolant hose & cover for coolant hose
Electrical liquid pump and wiring
6,ylon fuel line