Elgena Boiler Nautic-Therm Typ ME 10 Liter, 230V 660W und Motorkühlwasser
The Elgena Nautic-Therm is a hot water boiler specially designed for motor and sailing yachts, motorhomes, caravans and expedition vehicles.
Type ME is a combination device; It can heat up the process water, as with type M, via the engine cooling water or in stand as with type E via the built-in electric heater.
Nautic-Therm is pressure-resistant and can be fitted as standard or retrofitted to any cold water supply with hoses. The water fits submersible pumps, foot or hand pumps as well as for pressure pumps. If it is intended to connect to a water pipe with a pressure higher than 2.5 bar, a pressure reducer must be used. The devices are designed for hose connections to counteract vibrations in the maritime and mobile area.
Nautic-Therm is designed so that even when the hot water tank is empty the boiler always remains filled and can never be pumped empty. A complete emptying is therefore possible only when opening the water drain valve.
Nautic-Therm boilers and heat exchangers are made of the best acid-proof Niromaterial V4A and fully insulated. The excellent insulation will keep you warm the next day. The mounting may e.g. simply in the storage space, under a group of seats or wherever the appropriate space is available to be made.
A detailed installation manual is enclosed with each device.
5 years warranty!
38 x 30,5 x 30,5 cm / 4,5 kg
Installation position: horizontal
Heating element: stainless steel V4A / Incoloy
Voltage / Power: 230V - 660W
V4A heat exchanger 18 mm
Water temperature: continuously adjustable from 30 ° C to 80 ° C
Frost protection adjustable
Water tank stainless steel V4A
Insulation EPS 40 with protective hair
Overpressure protection sivety valve up to 3 bar
Hot water connection: Ø 10mm for hose connection
Boiler drain ball valve
Note: Other versions with 24V or 12V (also in combination) or with air connection (for hot water from the air flow of an air heater!) Are also available or see Nautic Compact - please report.