99% Camper-Kit - Complete heating set with 2kW output, 12V, Comfort Control Panel, 83mm flange

The heating kit for 99% of all campers. Everything you need in one set. Proven heating (Autoterm Air 2D), digital control unit, installation material for (almost) every situation, hot air distribution. Incl. extra-quiet pump and high altitude kit. So this set gives a new meaning to vanlife.
  • Available immediately
  • Delivery time: 3 - 4 Workdays (Other countries)
voltage 
control unit 
flange 
745,00 €
incl. 19% VAT , Free shipping to DE NL. shipping costs (Paket)
Old price: 827,00 €

  • travel-experienced employees
  • daily DHL shipping
    (Monday till Friday)
  • worldwide shipping
optional
optional
Please select a maximum of 1.
Your configuration

incl. 19% VAT , Free shipping to DE NL. shipping costs (Paket)

Description

Installation set with Autoterm Air 2D heating - fits 99% of all camper Needs

This set fulfills the requirements for 99% of all campers. Also for larger travel vehicles up to approx. 16 cubic meters of heatable volume (volume without furniture!).

The idea is that the heating is used for continuous operation. This means that the heating is not switched off, but continues to run at a low power level. Keeping a room at the right temperature uses significantly less energy than trying to heat up a cold interior within 30 minutes.

We assume that all vehicles have been properly insulated and that the driver's cab with its large, uninsulated windows is at least separated with a blanket in winter.

Don't worry: the heater is designed for continuous operation and has no problem with it. In principle, you can drive off at home, turn on the heating and, when you come home, turn it off again 4 weeks later. The power consumption is 10 watts at the lowest level, which is less than the parking light of your van.

Altitude kit / heating maintenance

The heater is equipped with an high altitude kit, which means that it also works in the Nepalese mountains or in the Andes. But that doesn't mean that it can't soot! If you leave the high altitudes, run your heating at full power for an hour so that deposits can burn.

This burning off is also necessary if you only operate the heating on a low level for a long time. Set it to full power at least every 1 - 2 weeks so that the combustion chamber gets really hot again. This is the most important and at the same time the only maintenance measure on the heating.

The 99% kit consists of the following parts:

Our bestseller diesel heater: Autoterm Air 2D with 2 kW heating power and high altitude kit for vehicles with 12V

Technical data Autoterm Air 2D (formerly Planar 2D):

  • Operating voltage: 12V
  • Heating capacity: 0.8 kW (min), 2 kW (max)
  • Air volume flow: 34 m³ / h (min), 86 m³ / h (max)
  • Fuel consumption: 0.1 l/h (min), 0.24 l/h (max)
  • Power consumption: 10W (min), 29W (max)
  • Hot air piping 60mm System

Also includes the complete installation kit for the heater:

  • Heater 12V
  • Low-noise Autoterm fuel pump, "Extra Quiet"
  • Exhaust silencer made of stainless steel (17 x 9 x 5cm)
  • Rubber holder for dosing pump
  • Metering pump wiring harness
  • Heater wiring harness
  • Air intake hose with integrated silencer
  • Heat protection tube
  • End piece exhaust pipe + clamp
  • Tank suction pipe
  • 5.5 m fuel line
  • fuel line connector
  • 1 m metal corrugated exhaust pipe
  • Screws, nuts, clamps, shrink tubing, cable ties
  • Operating instructions

Also included:

Control Panel

Comfort Control Panel - new, advanced control panel for Autoterm / Planar heaters. It offers more options and heating modes (including thermostat mode), further menu navigation languages, better timer options, voltage monitoring etc. 
The new design is smaller in size. It comes with a new multi functional  rubber knob and OLED-display.
Altogether Autoterm Comfort Contol scores in puncto user-friendliness and impresses with its slim design.
Cable length heater-panel is about 1,80m..

Installation flange

Our stainless steel flange that makes installing the heater easy, elegant and sexy. Developed in-house and a patented tigerexped design!

Cutting a rectangular hole (9 cm x 13 cm) in the vehicle floor is sufficient to mount the heater level and thermally decoupled. Then the tigerexped mounting flange can be glued or screwed (please do not use silicone, but a PUR sealant).

You can choose the size of the flange: For floors up to 48 mm (sufficient for most vans) or for 83 mm floor thickness (usually for cabins or high insulation and floor slabs). The flange should be min. 5 mm longer than the thickness of the floor (for the sealing joint).

T-pieces for the fuel supply

2 different T-pieces (8 x 8 x 5.3 mm and 5.3 x 5.3 x 5.3 mm) in case you already have a parking heater and can use ts fuel supply or you know your vehicle well enough to know, whether its fuel supply line is working for your car and heater as well. If that's not the case, there is also a fuel tank diesel extraction pipe in the kit so that you can take the fuel directly from the fuel tank.

fuel hose:

The scope of delivery includes fuel hose as a line connector. The included length is usually completely sufficient when shortened to suitable pieces. If, contrary to expectations, you cannot manage with it, you can reorder the hose by the meter under item number 35612.

Warm air pipe

The set also includes 3 meters of 60 mm hot air pipe. In 99% of the cases, this is a well-measured requirement.

Warm air outlets / distribution

A matching Y-piece and 2 air outlets 60 mm, rotatable, so that you can decide for yourself where you want to mount the two air outlets.

The right kit?!

The heating kit is suitable for vehicles with an interior space of 12 cubic meters to 14 or a maximum of 16 cubic meters - depending on the insulation and equipment, the location of the hot air outlet openings, the personal temperature feeling and the climate in which you drive. But e.g. For all VW vans and up to H2L2, this heating should be sufficient for common travel destinations.

Anyone who has a larger vehicle and does not want to isolate it or wants / has to do the balancing act between the Sahara and wintry Siberia, is wrong here! (Of course we also have a solution for this - our TWIN kit).

In the VW T5 / T6, the installation location for an air heater is prepared at the factory, the 99% camper kit would be unsuitable here, we have another suitable installation kit for this.

Warmwasser geplant?


Wenn du neben einem Heizgerät auch Warmwasser in deinem Camper installieren möchtest:

Die Autoterm Heizungen gibt es in Kombination mit Warmwasserboiler und speziellem Bedienteil für volle Systemintegration.

Mehr Infos dazu:

Zum Warmduscher-Kit

Videos

 

Others also bought:
Technical specifications
max. power:
2kW
Voltage:
12V
control:
Comfort Control Panel
Item weight:
6,77 kg
Dimensions packing ( l × w × h ):
49,00 × 36,00 × 31,00 cm
Reviews
Average item rating
Share your experiences with other customers!

All reviews:

Entries 21 – 40 of 121
Hat Spaß gemacht die Heizung einzubauen.
5 from 5
Hat Spaß gemacht die Heizung einzubauen.

Super Heizung, mit einer guten Anleitung und ein paar YouTube Videos ist es eine schöne Arbeit Sie zu verbauen und auch nicht schwer. Bei dem Set ist alles dabei was man braucht.
Würde ich so wieder kaufen.

Super Produkt
5 from 5
Super Produkt

Schnelle Lieferung
Nach Einbau lief die Heizung gut an und heizt unseren Hugo wunderbar

Canyoning kann nun früher gestartet werden!
5 from 5
Canyoning kann nun früher gestartet werden!

Wow! Habe das die Planar nun in unserem Opel Vivaro B verbaut! Ging super von der Hand, Flansch inTop Qualität und alles dabei was man braucht! Einzig ein bisschen mehr Krafstoffleitung wäre von Vorteil gewesen. Beim montieren des T-Stückes vorm Wasserzuheizer des Opel müssen die Originalschläuche ersetzt werden. Gestartet, lief 5min, dann Fehler 13 weil noch Luft in der Leitung war. Erneuter Start und nach einer Minute gings aber so richtig los! Musste dann nach einer Stunde abdrehen, weil der Lack Blasen warf :-) Scherz beiseite. Wenig eigen Gerucht und die Abgase sind vermutlich besser wie so manche Innenstadt Luft. Top Standheizung! Danke

Sehr gutes Gerät und gute Einbauanleitung
5 from 5
Sehr gutes Gerät und gute Einbauanleitung

Zum Einbau alles sehr gut beschrieben.
Kleiner Kritikpunkt: Die 4 Gewindestifte zur Befestigung der Heizung im Flansch evtl. vor Einbau kürzen,
da die Schellenverschraubung von Abgasrohr, Ansaugluftrohr und Dieselleitung platzmäßig sehr schwer werden kann.
Evtl. zu verbessern:
Die Geräusche des Schalldämpfers und Abgasschlauchende und auch etwas die Ansauggeräusche zur Verbrennung
könnten noch besser gedämpft werden.
Das klackern der Dieselpumpe ist deutlich hörbar, obwohl zusätzlich mit Silentblock verschraubt.
Ummantelung der Pumpe optional mit Schaumstoffbox.
Die Dieselheizung ist bei mir im Doppelboden verbaut und rundum schallgedämmt.
Somit von innen und außen nicht lauter, als die schon vorhandene Truma 4 Gasheizung.
Bin nun sehr zufrieden, zwei Heizsysteme zu haben, zumal die Dieselheizung im Verbrauch günstiger ist als Gas.
Der Zeitaufwand für Wuchterei und Schlepperei der Gasflaschen reduziert sich enorm.

Alles top!
5 from 5
Alles top!

Haben die Heizung eingebaut und es lief alles super! Es fehlten ein paar Verbindungsstücke aber die konnte man ja einmal teilen, daher kein Problem. Die Lieferung erfolgte weniger Tage und der Kundenservice ist bisher auch top gewesen! Die Heizung ist sehr laut, was wahrscheinlich normal ist aufgrund der Holzkonstruktion und ich vermute fast, das es durch den zusätzlichen Schalldämpfer nicht wirklich leider wird. Dafür wird es warm! Danke!

100% weiter zu empfehlen
5 from 5
100% weiter zu empfehlen

Das Kit beinhaltet alles, was für dein Einbau benötig wird.
Bei langen Fahrzeugen könnte die Spritleitung, je nach Einbauort der Heizung, ein paar Zentimeter länger sein, ansonsten TOP!!

Alles dabei!
5 from 5
Alles dabei!

alles Steckerfertig - Top
(fast) alles für den Einbau dabei - Top (-> für den Dieselfilter haben die Gummiverbindungsschläuche gefehlt, lässt sich aber problemlos lösen)
funktioniert (fast) auf Anhieb - mussten die Heizung 3x starten bis der Diesel bei der Heizung war (2x Fehlercode 13 am Bedienteil)
Fazit: eingebaut - läuft - ist warm!

Super Camper-Kit
5 from 5
Super Camper-Kit

Schnelle Lieferung. Einfacher Einbau, alles dabei was man braucht. Funktioniert einwandfrei.

Sehr gut
5 from 5
Sehr gut

Wir sind mehr als begeistert... super einfache Montage.

Tip Top
5 from 5
Tip Top

Gigantisch. Es hat mein.leben verändert. Beste sKIT

Einbau in MB-Vito
5 from 5
Einbau in MB-Vito

Supi Set, Preisleistung ist fair :-)

Auch perfekt für Wohnwagen
5 from 5
Auch perfekt für Wohnwagen

Ich habe das Kit in einen Dethleffs Wohnwagen als Alternative zur serienmäßigen Gasheizung verbaut und bin super zufrieden. Die Vorurteile einer lauten Diesel Standheizung gehören der Vergangenheit an. Ich kann dieses Set absolut empfehlen.

Alles was man braucht
5 from 5
Alles was man braucht

Tolles Paket, enthält alles was man braucht. Lieferung kam ordentlich verpackt und zügig! Gerne wieder!

Super Set
5 from 5
Super Set

Das Set und die positiven Bewertungen versprechen nicht zu viel. Es ist wirklich alles dabei und die Leitungslängen sind mehr als Großzügig bemessen.

Ich hab die Heizung an einem Tag in meinem T3 Syncro verbaut. Hat alles super geklappt und echt Spaß gemacht. Das Festziehen der Rohrschellen im Einbauflansch fand ich nicht so problematisch wie von vielen beschrieben. Mit einem 7er Ringschlüssel und etwas Geduld war das kein Problem.

Preis-Leistung stimmt
5 from 5
Preis-Leistung stimmt

Für den Preis eine hervorragende Heizung

Alles super
5 from 5
Alles super

Perfekter Kundenservice und das Gerät ist auch top!!

Super gelaufen
5 from 5
Super gelaufen

Der Einbau war in wenigen Stunden fertig. Die Tankentnahme habe ich etwas anders gelöst( Dukato). Ein 8 mm Loch gebohrt und mit Dichtung oben und unten am Deckel montiert. Ich bin super zufrieden.

Super Set
5 from 5
Super Set

das Set ist super alles dabei und alle schellen hochwertig und die Heizung läuft bis jetzt super

Alles dabei was man braucht
5 from 5
Alles dabei was man braucht

Schnell geliefert, nachdem sie wieder der verfügbar war und der Einbau, dank der zahlreichen Einbauvideos für Selbstausbauer kein Problem.

Passt gut!
5 from 5
Passt gut!

Ich habe die Heizung unterflur mit der Einbaukiste in/an meinen T4 montiert.
Das Kit enthält zu 99% alle nötigen Teile. Das fehlende Prozent besteht aus 4 Schellen zum Sichern der Luftschläuche an der Heizung.
Bedienung ist einfach, die Anleitung erfordert leichte Englisch Kenntnisse.
Wenn man ein wenig routiniert im Schrauben ist, dann braucht man sie eigentlich nur bedingt.
Wichtige Sachen sind per Bilder gut dargestellt.

Entries 21 – 40 of 121