Camper Shower of stainless steel with quick coupling, start/stop and separate mixer outlet elbow - Queensize Camper
Description
Camper shower / shower set from Queensize Camper - Exclusively at tigerexped
Do you value high-quality equipment in your camper and want to avoid plastic components? This shower set made of stainless steel is convincing in terms of both quality and design and underlines your requirements for a professional made motorhome / boat interieur.
Separated mixer and wall outlet elbow
In order to allow the greatest possible flexibility, the mixer fitting and wall outlet elbow are designed separately in this camper shower. They can therefore be installed in different positions.
Shower head with start-stop button
The queen-size camper shower helps you save water. The shower has a quick-to-use start / stop button for this purpose. However, you don't have to hold it down for the water to run. The button is designed as a switch and thus locks in the selected function.
The start / stop button also ensures that if you accidentally (perhaps even unnoticed) actuation of the mixer lever, no water runs and submerges your vehicle. Flowing will start not until the button is activated.
Perfect for for additional outdoor shower
The shower hose can be easily separated from the wall outlet using a quick coupling and connected to another quick coupling. This allows an outdoor water connection to be used perfectly with the hose and start / stop shower head as an outdoor shower.
Two jet types can be selected
For different preferences, you can choose between two different waterjets by turning the pearl ring.
Camper shower installation
The mixer is mounted using a drilling of at least 34 mm and secured against twisting from behind with a nut / washer and flat seal. On the inside of the rosette there is also an O-ring that seals against the shower wall. The mixer is supplied by a hot or cold water hose, at the end of which there is a 10 mm hose nozzle.
The 90° angled outlet is connected to the wall outlet elbow via a connection hose (length 100 cm). This is installed with a drilling of at least 21 mm. A quick coupling is screwed on at the exit. The hose has the matching counterpart and is 2 m long.
The holder for the shower head is mounted via two holes, e.g. with wood screws, and can be positioned anywhere.