Tank connection, angled made of brass
No breaking, threading over or becoming brittle - the Queensize Camper brand tank connection is made of brass and is therefore of the same quality as with domestic installations. While many similar products consist of several plastic parts, this is only one solid component, which reduces the potential for possible leaks to a minimum. The nut for assembly is on the outside for easy tightening. This tank connection has a 1/4 "internal thread. An angle piece can be attached to it, for example, in order to be able to withdraw liquid right down to the bottom of the tank. Or to connect a submersible pump. Plastic angles or other accessories.
For the common size of 10 mm water hoses.
Assembly
Drill a hole, guide the tank bracket (Pos1) with seal (Pos2) through the hole from the inside and secure it from the outside with a washer (Pos3) and nut (Pos4). Attach the hose and secure with a clamp. Suitable for tank wall thicknesses up to 8 mm. For even stronger tanks: Simply drill a small recess with a Forstner bit to taper the tank wall - be careful, not too far;)
There are no reviews yet.