Skip to main content Skip to search Skip to navigation

1P+N oder 2P+N Kleinverteilung IP65 mit 0,03A/16A FI/LS zur Absicherung (RCBO / Fehlerstromschalter) von 220V-Anlagen im Reisefahrzeug

1P+N or 2P small distribution unit (IP65) with 0.03A/16A RCBO

 

Note: Why are there two different versions? DIN/VDE standards require all-pole disconnection in the event of a fault for camper installations; both versions shown here meet this requirement. However, the key difference lies in the circuit breaker (MCB). In the 1P+N version, the breaker is located only on the phase (L1) conductor. In the 2P version, by contrast, an overload condition can also be detected on the neutral (N) conductor—a feature that unfortunately makes this version significantly more expensive. The reason is as follows: In the camping sector, polarity-protected CEE connectors (compliant with IEC 60309) are mandatory, which theoretically makes it impossible to swap the phase (L1) and neutral (N) conductors. If this correct wiring is guaranteed, the 1P+N version works perfectly well. However, if it is impossible to ensure that L1 and N will not be swapped—for instance, because adapters converting CEE to Schuko (which are not permitted!) might be used—then the 2P version must be installed.

  • Available immediately
from
76,95 €
incl. 19% VAT , plus shipping costs
  • travel-experienced employees
  • shipping with DHL & GLS
  • everything from one source
  • payment by Paypal or bank transfer
Description

Protection solution for all types of single-phase AC circuits in modern systems. The devices simultaneously offer the following protection: short-circuit protection, overload protection, additional protection or error protection in protective measures to protect against electric shock, preventive fire protection.

Fault current: 30mA
Fault current class: A
Ut_min: 170V
Topology: 1P+N or 2P
Max. current LS: 16A

The whole thing is packed in an IP65 small distributor according to DIN 43871/VDE 0603 made of impact-resistant plastic. Including PE/N clamp, double membrane connector, cover strips, label strips. Small distributor, 3 division units, PE/N terminal, each with 1 clamping point 16 mm², 3 clamping points 6 mm², 3 elastic entries at the top, cover and labeling strips, insulating plugs, additional double membrane connectors.

Dimensions: 15x10x10cm

manufacturer information:
tigerexped GmbH & Co. KG
Weseler Str. 82
Alpen, 46519
NRW, DE
info@tigerexped.de

responsible person:
tigerexped GmbH & Co. KG
Weseler Str. 82
Alpen, 46519
NRW, DE
info@tigerexped.de

Others also bought:
Technical specifications
Item information Value
Item weight:
 0,58 kg
Dimensions packing ( l × w × h ):
 15,00 × 10,00 × 10,00 cm
Reviews
Write the first review for this item and help others make a purchase decision!

There are no reviews yet.