3-way hot water tap, retractable, made from high-quality A4 stainless steel
This product combines elegant design and high-quality materials with innovative functionality. This hot water mixer tap can be completely retracted into the basin*, helping to save space. The matching Queensize Camper sink can be mounted with the rim UNDER the worktop, creating a completely flat surface in combination with the tap, which can be covered with the worktop cut-out.
NEW:The 3rd way of the Deluxe version!
In addition to the familiar functions of the hot water tap, the Deluxe folding tap is now equipped with a third way. The water is fed through a separate pipe from the inlet to the outlet, separate from the mixed water channel. At the end of the outlet, a cartridge is mounted under the rotary handle, which regulates the 3rd way continuously from 0-100% and also closes it completely. The water then comes out of the smaller front aerator (M16.5x1 thread).
This way is perfect for tapping filtered water, for example (install the filter directly in front of the tap). On yachts, however, salt water can also be connected there, so that the dishes can be cleaned with salt water and only rinsed briefly with fresh water at the end – this saves an enormous amount of fresh water! For this application, the entire tap is made of A4 stainless steel (SUS 316).
The great thing about it is that you no longer need two fittings if you also want to tap filtered water!
Volume adapter and 2-jet aerator
The second, slightly larger aerator (M24x1) is for the mixed water outlet. This is turned on and off at the bottom of the push-button cartridge by pressing the button, and the desired temperature is set on the rotary handle. To reduce the volume, the aerator has a volume control: turning the rubber ring at the top of the aerator allows the volume to be continuously reduced from 100 to 20 percent and can then be left in the desired position. In addition, the jet type can be changed by turning the lower ring, as with the Queensize Camper shower heads.
Swivel and foldable
With a swivel range of 360° or 90°, the fitting can be completely retracted into the QC sink. Without a tap on the work surface, a wide range of new uses are possible, even where the (covered) sink is located – whether as a storage surface or, for example, when the bed needs to be pulled out over the surface at night, etc.
With a locking function every 45°. And in the event that the spout should sink to the sink floor while moving, a rubber ring is installed at the end of the spout.
Connection
Thanks to the connection area being angled at 90°, you only need very little installation space next to the sink wall.
The connection is made using the new Quick-Fit flexible hose, which comes as standard with the Deluxe fitting with the new 12 mm quick-release connection: This allows you to connect either a 10 mm hose or the 12 mm quick-connect system from John Guest or Reich Uni-Quick, for example.
A 32 mm circle hole drill bit is included.
The 3 connection threads are standard threads (M10x1).
System pressure
The product has a maximum system pressure of 4 bar and a recommended minimum pressure of 1 bar.
Dimensions
Height 270 mm Projection 212 mm Hole diameter 32 mm
Weight: approx. 1220 g
*Note
Depending on the sink size, the folding tap can only be installed in certain positions in Queensize Camper sinks. (For details, see drawing in PDF)
Important operating instructions: When the cold season arrives and there is a possibility of frost, please make sure to completely drain the tap of water! The best way to do this is to swing the spout into the sink and blow air through it, i.e. in the direction in which the pump pumps. And/or unscrew the aerator so that all the water can run out of the spout when it is swivelled into the sink. The third way must be completely open.
Scope of delivery:
- Deluxe folding tap with 3rd way, volume adapter and 2-jet aerator
- 3 x flexible hose with 10 mm hose nozzle / 12 mm quick-fit system
- 32 mm hole circle drill
manufacturer information:
Queensize Camper UG
Alte Mühle 22D
Hamburg, 22395
Hamburg, DE
info@queensizecamper.de
responsible person:
Queensize Camper UG
Alte Mühle 22D
Hamburg, 22395
Hamburg, DE
info@queensizecamper.de
There are no reviews yet.