This wall outlet is extremely slim and inconspicuous. There is not even a handle for volume control, but the end can be turned using the two O-rings, allowing the volume of the jet to be adjusted continuously via the internal cartridge (from completely turned off to fully open). There is one inlet, so the outlet is suitable as a cold water version, but it can also be combined very well with the Queensize Camper mixer, which then sends the mixed hot water to the outlet. The rosette sizes are the same, creating a uniform look.
Installation
The wall outlet is installed in a 21 mm hole (½") and screwed tight with the nut provided. There is an O-ring on the outside of the rosette and one on the thread to ensure a seal against the wall.
The ½" angle nozzle with union nut is connected directly to the wall outlet and can be freely adjusted in any direction. The angle nozzle has a 10 mm hose nozzle at the end, but behind it there is also a 12 mm surface for the quick-release systems from John Guest or Reich (Uni-Quick). If this system is to be used, the hose nozzle is simply cut off, deburred and a suitable quick-release coupling can be attached. The fitting can be easily installed on walls up to 18 mm thick; if the wall is thicker, a recess must be made for the nut.
Scope of delivery
- Wall outlet with standard aerator and volume control
- Angle connection QC-100-15 with 10 mm hose nozzle but also with 12 mm Fast Connect coupling, for connection to e.g. the John Guest system or Reich UniQuick, thread size ½"
Important operating instruction: In case of frost, please make sure to completely drain the tap of water! Turn the cartridge fully open so that the water can run out.
manufacturer information:
Queensize Camper UG
Alte Mühle 22D
Hamburg, 22395
Hamburg, DE
info@queensizecamper.de
responsible person:
Queensize Camper UG
Alte Mühle 22D
Hamburg, 22395
Hamburg, DE
info@queensizecamper.de
Item weight: |
0,95 kg |
There are no reviews yet.
