Power Jetz plus submersible pump from Reich
The 12V submersible pump from Reich is equally suitable for pumping drinking water and hot water. Thanks to its robustness and performance, it is suitable for continuous operation and is briefly protected from damage in the event of dry running.
The power cable length is about 100 centimeters, and the pump has a diameter of Ø 45 millimeters. It is compatible with hoses that have an inner diameter of 10-14 millimeters.
The capacity of the Power Jet Plus submersible pump is 25 liters per minute with a maximum delivery pressure of 2.1 bar. This ensures that there is sufficient water and water pressure at each tap point, even with longer pipe routes or when multiple consumers are used at the same time.
The pump has an automatic venting and can optionally be expanded with a check valve and a cleaning sieve.
Like all other high-performance submersible pumps from Reich, the Power Jet also has automatic ventilation as standard.
Technical data:
- max. Pressure: 2.1 bar
- max. Flow rate: 25 l/min
- Power consumption: 75 W
- Voltage: 12V
- Cable length: approx. 100cm
- Diameter: 4.5 cm
- For hoses with 10-14mm inner Diameter
Connection instructions:
It often happens that the submersible pump is connected positive to negative due to the cable colors used. Therefore, please refer to the enclosed instructions: With this product, the BROWN cable is positive and the BLUE cable is negative! The pump will still run if connected backwards; the impeller will then rotate in the opposite direction. However, this results in higher pressure – the flow rate at the tap will not be as high as desired, and the pump will also fail more quickly due to the higher pressure.
manufacturer information:
REICH GmbH
Ahornweg 37
Eschenburg, 35713
Hessen, DE
info@reich-web.com
responsible person:
REICH GmbH
Ahornweg 37
Eschenburg, 35713
Hessen, DE
info@reich-web.com
Item weight: |
0,28 kg |
There are no reviews yet.